Assigning Other Components To The Component Select Buttons - Sony RM-VL700T Bedienungsanleitung

Assigning Other
Components to the
Component Select
Buttons
You can assign another
component to any of the
Component Select buttons not
being used.
Notes
• Once you assign another component
to a Component Select button, the
setting of the component code
number will be erased. The
component code number will not
return even if you reset the newly
assigned component and turn back to
the original component.
To use the original component
setting, set the component code
number again (page 8).
• If you have assigned another
component to the TV or AMP button,
the volume of the TV or amplifier
(page 13, 24) cannot be controlled
even when you select other
components.
• If you have already programmed any
remote control signals on the
Component Select buttons using the
Learning function, you cannot assign
other components to the Component
Select buttons.
Example: To assign a CD player
to the CBL/SAT button
1
Press SET.
All Component Select buttons
flash.
2
Press the Component Select
button to which you want
to assign a function.
The selected Component Select
button lights up.
3
While holding N pressed,
press one of the following
Number buttons to select
the one to which you want
to assign the function.
In this example, press the
Number 5 button to select CD.
The Component Select buttons
1
change as follows, and
assigning to the selected
Component Select button will
2
be set.
when N is pressed
3
when N + 5 are pressed
when the buttons are released
+
Continued
27
GB