Setting A Component Code By The Search Function - Sony RM-VL700T Bedienungsanleitung

Setting a component
code by the Search
function
You can find a code number
available for a component that
doesn't have one in the supplied
"Component Code Numbers".
Before starting the Search
function
Set each component to the
following status so that the Search
function works effectively.
TV: Power-on
VCR, CBL/SAT, DVD, AMP:
Power-off
CD player*, MD player*, cassette
deck*: Power-on with a playback
source (disc, cassette tape, etc.)
* If any of these components are
assigned to any of the Component
Select buttons (page 27), you can
set a component code using the
Search function.
1
Press SET.
All Component Select buttons
flash.
2
Press the Component Select
button for the desired
component.
The selected Component
button lights up, and all other
buttons turn off.
3
Press PROGR+ or PROGR–
and 1 in turn until the
component reacts as
1
described in the following.
3
TV: Powers off
2 VCR, CBL/SAT, DVD, AMP:
Powers on
CD player, MD player, cassette
deck: Plays back
4
Press PROGR + to go to the
next code number.
Press PROGR – to go back to
the previous code number.
The Component button flashes
three times after the numbers
3
have turned one cycle.
Continued
GB
11