Chapter 1 Introduction; Content Of The Package; Functions Of The Unit; Specification - STRAIGHT CORE GWP-106VE Betriebshandbuch

Chapter 1
Thank you very much for purchasing the GWP-207VE wireless client unit. This is a unit for building
the network according to the 802.11b or 802.11g standard. Wireless units consist of access points (the unit
in the "Access Point" regime) and client devices (the unit in the infrastructure regime). For interconnection of
further computers without an access point it is possible to use an AD-HOC setting, for building a Point-Point
connection, it is possible to use WDS/Bridge regime.
This unit supports WEP, WPA, ESSID security systems and a MAC address filter to ensure security
of the wireless network. Due to these security standards it is possible to avoid any unauthorized access to
your wireless network.
This unit is equipped with a 14 dB gain aerial integrated panel. Using a www interface, this equipment
enables the control of the overall emitted output, i.e. the output which includes the gain of the aerial.
This unit can be easily controlled by any web browser which is localised into several languages.
Contact your supplier to receive the current list of language modifications for the user interface or you can
find it on the web pages of the producer at www.straightcore.net.
The firmware (the control program of the unit) is developed with the emphasis placed on the use in
large wireless networks. The cover of the unit is designed for use outside of buildings with sufficient
protection against drip and other atmospheric influences. For easy setting it is possible to connect the GWP-
HDF direction finder to the unit whose description and the use is contained in this Manual.
Note: This manual is written for firmware version 1.0.6. Recent firmware may contain functions not contained
in this version of the manual.
You can find pictures in the colour appendix in the end of the manual. The number of the picture
related to the respective chapter is always located beside the symbol
1.1

Content of the package

The package contains the following items:
One Quick Installation Manual
One Access Point
One Power Adapter
One PSW-105 Switch with POE system (optional)
1.2

Functions of the unit

Compatible with specification IEEE 802.11b/g (DSSS) 2.4GHz.
Waterproof construction with integrated 14 dB aerial
Power-over-Ethernet (PoE) system
High transmission rate up to 54 Mbps.
Simple integration to current LAN networks.
Automatic access rate reduction in an interfering environment.
64/128-bit WEP and WPA Encryption Function for wireless transmission security.
Integrated DHCP server for automatic IP address assigning.
Web based control.
1.3

Specification

Standards: IEEE 802.11b/g (Wireless section), IEEE 802.3 (LAN section)
Transmission Rates: 54/48/36/24/18/12/11/9/6/5.5/2/1Mbit/sec with automatic reduction in an
interfering environment
Security: 64/128-bit WEP and WPA transmission encryption
Frequency range: 2.400~2.4835GHz (ISM band)
English version
Introduction
3
Introduction