Tile Server; Watchdog/Restart; Network Test - STRAIGHT CORE GWP-106VE Betriebshandbuch

2.7.3 Tile server

The "Time Server" tab allows you to configure synchronization with a NTP Time server. You can select a
server from the prepared list or define your own.

2.7.4 Watchdog/Restart

Due to operating reasons it is sometimes suitable to restart the unit at automatically set intervals. In this case
use the "Watchdog/Restart" tab settings. This enables this function and also defines the interval for
automatic restart.
Another possibility is to restart the unit when there is a lost connection with the respective IP address. It is
necessary to define the test interval and one or two IP Addresses. IP address 1 is always checked during the
test and when the packet loss is more than 20%, it proceeds to test IP address 2. If the IP address testing
passes, IP address 2 is not tested. When neither IP address 2 is available, the unit will automatically restart.

2.7.5 Network test

The "Network Test" tab includes standard TCP/IP network testing tools. It provides Ping, Arping and
Traceroute tools, including the corresponding parameters. The test result is displayed in the lower window.
After entering the parameters use the "Send" button.
English version
Configuration of the wireless access point LAN
17
22
23
24