Chapter 3 Administration; Changing Password; Save/Restore Configuration; Update - STRAIGHT CORE GWP-106VE Betriebshandbuch

Chapter 3

3.1.1 Changing password

The "Change of Password" tab, as results from the name, allows you to change access passwords for unit
control.
The "Super-user Off" parameter can block the possibility to connect to the unit with a non-public password
set by producer.

3.1.2 Save/Restore configuration

The "Backup/Restore Configuration" screen enables to save the current configuration settings of the access
point. The saving of the configuration provides further security and a suitable manner of solving potential
problems with the access point when it is necessary to restore the default factory settings. If you save the
configuration setting, you can reload the saved configuration to the access point using the "Restore" button.
In the case of serious problems it is possible to use the "Restore the default factory settings" option. This
option resets all the configuration values of the Access Point to the default factory values.

3.1.3 Update

The "Update" page allows you to update the software used by the unit, in the case that the unit is not
working as expected or new operation software is released. When you select the file to update, use the
"Restore" button. The update can take up to 180 seconds – do not interrupt the power of the unit during
this time. It is recommended to perform the update through metallic cable connection only.
When you connect to the unit using low data throughput connection, mark the "Slow Upload" tab. This will
make the transmission timeout longer.

3.1.4 Web interface

This page is used for configuration of the interface parameters for the unit service and its accessibility
from each port. In addition, you can define the TCP/IP port for access, which is appropriate, for example in
such cases, when it is necessary to release port 80 for reason of the www server in DMZ operation or by
port forwarding.
3.2

Restart

If the unit does not work correctly you can remotely restart the operating system. Your settings will not
be changed. You can perform the reset by clicking on the Restart button in the Main Menu. Restarting is
instant, without confirmation dialog.
English version
Administration
18
Configuration of the wireless access point LAN
25
26
27
28