Chapter 12 Troubleshooting - Block WFR 700 Bedienungsanleitung

Troubleshooting
The device you have just purchased is equipped with state-of-the-art technology and is safe to
operate. Nevertheless, problems or malfunctions may occur.
Before contacting a service technician, refer to the following possible solutions.
Distorted sound or no sound is audible.
› Check if all cables are properly connected.
Remote control is not working.
› Check if the batteries have been inserted correctly.
› If batteries are empty, replace them with new ones.
› Point the remote control to the remote sensor and press to operate.
› Remove any objects found between the remote control and the remote sensor.
› Make sure the distance between the remote control and the device does not exceed 8 m
Buttons do not function (on the device and/or remote control).
› Turn the device of and then on again. As an alternative, turn the device of, unplug it from the
power outlet and plug in again. (The device also may not be functioning due to a stroke of light
ning, static electricity or other external factors.).
Interference during reception.
› The reception frequency has not been set properly.
› The antenna has not been positioned properly.
› Start a station search.
Network connection is not possible.
› The network is not available at the moment. Try again later.
› The router restricts access to the listed MAC address of the unit. You can obtain this address
from MENU › System settings › View settings and add it to the router list.
› Check the distance to the router, in case you have a wireless network.
› Change the selected encryption method on the unit.
› Use the menu of the unit to set up the system manually.
› Check that your firewall is not preventing access.
› Check the network cable.
Downloaded from www.Manualslib.com
Any repairs other than those mentioned above are to be carried out solely by an aut-
horized technician.
Chapter 12
manuals search engine
57
Troubleshooting
12