Quick Start - ECOVACS deebot 8 Benutzerhandbuch

3. Operating and Programming

3.2 Quick Start

Charging Dock Placement
1
Place the Charging Dock on a level floor
surface against the wall with the base
perpendicular to the ground. Keep the
immediate area 1.5m (5') in front of the charger
and 0.5m (1.6') on both sides of the charger
clear of objects and reflective surfaces.
Plug the Charging Dock in.
Install Side Brushes
2
Attach Side Brushes to the bottom of
DEEBOT 8 by pressing a brush into each slot
with the matching color until it clicks.
Power ON
3
Turn the robot's Bottom Power Switch to
the ON position. "l" indicates ON and "O"
indicates OFF.
When DEEBOT 8 is not working, it is
*
suggested to keep it powered ON and
charging, instead of powered OFF.
8
EN
ON