Mode Of Operation; Instructions For Installation And Operation - Reinecker MAXLUPE mini Gebrauchsanweisung

Mode of operation

Text or pictures are recorded by an integrated colour camera
with a special lens and are displayed with high brightness in
either full colour, black and white or positive/negative on a
TFT-display. Due to the light weight and a specific coating
MAXLUPE MINI / MINI plus accurately and easily slides the
over printed items. MAXLUPE MINI / MINI plus is designed
for use with either mains or battery power. MAXLUPE MINI /
MINI plus is equipped with two magnification settings.
NOTE!
The camera recording the printed material is symmetric to the
display. Camera and display have the same position to the
original copy. Therefore specific paragraphs of a text or parts
of a picture can easily be found and magnified.

Instructions for installation and operation

MAXLUPE MINI / MINI plus should only be installed and opera-
ted in closed and dry rooms. The screen of the MAXLUPE MINI
is equipped with a coated glass panel. However, MAXLUPE
MINI / MINI plus should not be exposed to direct sunlight or
direct light to avoid disturbing reflexes or increased heat.
MAXLUPE MINI / MINI plus can be either operated with
the integrated lithium-ionic batteries or for mains operation
MAXLUPE MINI / MINI plus is powered by a special power
pack, which allows unrestricted operation.
30