Operation
DHCP IP (AUTO)
If you have selected the DHCP IP (AUTO) option, the IP address will
be automatically set when a DHCP server is detected .
Press the
Fixed IP (manual)
If you have selected the Fix IP (manual) option, you must set the IP
address manually . To do this, you must enter the following data: IP
address, subnet mask, standard gateway, DNS server IP address .
Use the
entries .
Press the
WLAN setup
Before you start the configuration of a WLAN network, check that
●
the WLAN USB adapter is connected to the USB HOST port on
the back of the device .
●
The wireless router or the access point (AP) or your PC is fitted
with a WLAN adapter or a WLAN card .
●
Your device is within range of the router .
PN40HD
Enter button to confirm the IP address.
◄► navigation button and numeric keys to make the
Enter button to confirm entry.
g
113