Configuring Network Settings; Lan Setup - Hama PN40HD Bedienungsanleitung

g

Configuring network settings

Before you start the network configuration, ensure that
● the device is connected to a LAN (wire-bound local computer
network) or to a WLAN (wireless local computer network) .
● The NetBIOS interface and the computer's TCP/IP network proto-
col are active .
● The firewall is inactive (switched off) or at least permits access to
the device .
● The GUEST account of your computer is active (enabled) .
● The file folders you wish to browse on your computer are ena-
bled, and
● EVERYONE or GUEST has access rights to the folders .

LAN setup

Select the submenu "Network" and the menu item "LAN setup"
‹
as described in the section "Opening the setup menu and
navigating" .
The selected menu item with the corresponding setting values (set-
ting options) appears on the screen .
Use the
‹
option or a fixed IP (manual).
Press the
‹
112
▼▲ navigation buttons to select the DHCP-IP (Auto)
Enter button to confirm the selection .
Operation
PN40HD