Hama PN40HD Bedienungsanleitung Seite 122

g
Upgrading the system
Select the submenu "System" and the menu item "System
‹
update" as described in the section "Opening the setup menu
and navigating" .
The selected menu item with the available update possibilities ap-
pears on the screen .
■ Select "System update" to update the firmware via a USB stick.
– Copy the file "install.img" to the main directory of the USB
stick and then connect the stick to the USB port of the device .
– Confirm the selection with the
HDD formatting
You can format a hard disk connected to the eSATA interface under
the menu item "HDD Format"
NOTE
► All data saved on the hard disk is deleted during formatting .
Select the sub-menu "System" and the menu item "HDD format"
‹
as described in chapter "Opening setup menu and naviga-
tion" .
The selected menu item appears on the screen .
Use the ▼▲ navigation buttons to select the menu item "Exter-
‹
nal HDD" for formatting the hard disk or the menu item "Cancel"
to cancel the procedure .
Confirm the selection with the
‹
Confirm formatting with the Enter button. A confirmation message
appears on the screen with the warning that formatting will irrevers-
ibly delete all the data on the hard disk .
122
Operation
Enter button .
Enter button .
PN40HD