g
WPS(AP): configuring a direct connection to the router
In WPS(AP) mode, computers with WLAN network adapters, also
known as WLAN clients, are connected to an existing network us-
ing a WLAN router or access point . Entering the network name and
password is not necessary . The router or access point must support
WPS(AP) mode .
Two options are available:
PBC (connecting by pressing a button)
■
Activate the WPS mode on your router or access point . Pay atten-
tion to the instructions in the user manual of the router .
■
Press the
■
Press the
PIN (connecting after entering a PIN)
■
Enter the PIN displayed into the router . Pay attention to the in-
structions in the user manual of the router .
■
Press the
■
Press the
118
Enter button to proceed to the next step .
RETURN key to cancel the setting .
Enter button to proceed to the next step .
RETURN key to cancel the setting .
Operation
PN40HD