Hama PN40HD Bedienungsanleitung Seite 110

g
Setting the colour saturation
Select the submenu "Video" and the menu item "Colour satura-
‹
tion" as described in the section "Opening the setup menu and
navigating" .
The selected menu item appears on the screen .
Use the
‹
The new settings are displayed on the screen .
Press the
‹
the setting .
Setting the video system
Select the submenu "Video" and the menu item "Video system"
‹
as described in the section "Opening the setup menu and
navigating" .
The selected menu item with the corresponding setting values (set-
ting options) appears on the screen .
You can adapt the TV standard of the outgoing video signal (the
colour transmission system) to the connected television under menu
item "Video system" . The following TV standards (systems for colour
transmission) are available here: HDMI Auto, NTSC, PAL, 480p,
576p, 720p 50 Hz, 720p 60 Hz, 1080i 50 Hz, 1080i 60 Hz,
1080p 50 Hz, 1080p 60 Hz .
Use the
‹
ard .
Press the
‹
Activating 1080P 24 Hz mode
Select the submenu "Video" and the menu item "1080p 24 Hz"
‹
as described in the section "Opening the setup menu and
navigating" .
The selected menu item appears on the screen .
Use the
‹
ting .
Press the
‹
110
▼▲ navigation buttons to set the colour saturation .
Enter button to confirm the selection and activate
▼▲ navigation buttons to select the desired TV stand-
Enter button to confirm the selection .
▼▲ navigation buttons to activate/deactivate this set-
Enter button to confirm the selection .
Operation
PN40HD