Operation
PRN45HD
Downloaded from
www.Manualslib.com
DHCP IP (AUTO)
If you have selected the option DHCP IP (AUTO), the IP address will
be automatically set when a DHCP server is detected .
Press the
Enter button to confirm the IP address.
FIX IP (MANUAL)
If you have selected the option Fix IP (manual), you have to set the IP
address manually . To do this you have to enter the following data: IP
address, subnet mask, standard gateway, DNS server IP address .
Use the
◄► navigation button and numeric keys to make the
inputs .
Press the
Enter button to confirm the inputs.
WLAN setup
Before you start the configuration of a WLAN network, check that
●
The WLAN USB adapter is connected to the USB HOST port on
the rear of the appliance .
●
The wireless router or the access point (AP) or your PC is fitted
with a WLAN adapter or a WLAN board .
●
Your appliance is within range of the router .
manuals search engine
g
149