Installing/Removing Main Memory - Fujitsu D3313 Kurzanleitung

6 - English

Installing/removing main memory

Technical data
Technology
Total size
Module size
Only unbuffered 1.25V / 1.35V / 1.5V memory modules without
ECC are permitted to be used.
DDR3 memory modules must comply with the PC3-10600, PC3-12800
or PC3-14900 specification.
Module 1 must be equipped first!
The mainboards have up to two module slots.
Depending on how the system is configured, the visible main memory may be reduced.
The installation/removal is described in the "Basic information on mainboard" manual.
32
DDR3–1333 / DDR3–1600 / DDR3–1866
1, 2, 4, 8 and 16 GByte (D3313-A / D3313-E / D3313-G)
1, 2, 4 and 8 GByte (D3313-B / D3313-F)
1, 2, 4, 8 and 16 Gbyte (D3313-S)
1, 2, 4 or 8 Gbyte per module
Installing/removing main memory
Fujitsu