Converting The Manual Uncoupler To An Electric Uncoupler - FLEISCHMANN multiMAUS 990001 Kurzanleitung

5.3 Converting Manual Points to
Electric Points
By simply clipping on (Fig. 21) a point
motor, you can convert any FLEISCH-
MANN manual point to electric operation,
so that it can be operated from a central
control panel.
After clipping into position on the point,
then follow the instructions on wiring it up
to the control panel and the relevant con-
troller clips.
5.4 Converting the Manual Uncoupler
to an Electric Uncoupler
By simply clipping on
motor, you can convert any FLEISCH-
MANN uncoupler track to electric operati-
on, so that you can uncouple, or pre-
uncouple, your trains from a central control
panel.
(Fig. 22) an uncoupler
55