Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION
Connection to flue (for a pipe
with a diameter of 120 mm):
Procure a pipe with a diameter of 120, and
connect one end of the pipe to the ventilation
hole on the upper side of the hood and the
other end to the flue.
It is not advisable to make connections to the
flues connected with stoves or exhaust shafts.
Do not make connections to these types of
flues. Pipe connection must be as short as pos-
sible and have minimum number of elbows.
2- Internal Circulation (connec-
tion without a flue):
If your kitchen does not have a flue, you must
use an anti-odor filter to operate your hood.
Carbon anti-odor filter cleans the air inside
kitchens and returns this air back to the kitchen
where a flue is not available.
Connection without flue
20 ENGLISH
_____________________________________
Anti-odor filter contains charcoal (active car-
bon). This filter looks like an oil trap filter, and
it must be replaced every 4 months approxi-
mately depending on your usage frequency.
Pull the front panel to install carbon filters. To
install the carbon filters, install them to both
sides of the motor holder (Figure 10). To re-
move the carbon filters, repeat the above op-
erations in reverse order.
(Figure 10)
Werbung
Inhaltsverzeichnis
