PeakTech 9020A Bedienungsanleitung Seite 67

Green: the meter is power on
Dim: the meter is power off
Battery Light:
4.
Light is Red indicates the meter is being charged now.
Light is Green indicates the meter is full charged
5V-T/ 12V-T/ 24V-T Light:
5.
Indicates ANT 5V ON/12V ON / 24V ON/OFF
LOCK-T/C:
6.
This light will be on when Terrestrial signal or cable signal is locked.
LOCK-S:
7.
This light will be on when Satellite signal is locked.
22k/13v/18v light:
8.
Indicates the mode of 22k/13v/18v
Arrow key and OK key:
9.
Use Arrow key to browse the item, press OK key to select
EXIT key:
10.
Exits from the present menu and backs to the previous on the device
MENU key :
11.
Enters and exits the main menu
Numerical key:
12.
Enters numerical settings directly.
FIND key:
13.
Accesses easy satellite find menu that sets a satellite dish quickly.
Spectrum:
14.
Spectrum analyzer
H/V:
15.
A quick key to switch 13/18V output on the DISH SETUP menu
0/22K / AV IN/OUT :
16.
A quick key to switch 22K output on the DISH SETUP menu
Or AV IN/OUT switch
Mute:
17.
Quickly mute the beep alarm when signal is locked.
Screenshot
18.
Store the displayed as an image when USB disk connecting.
AHD
19.
For entering CCTV mode to receive the AHD signal.
66