Technical Specifications; Safety Instructions - Ferm SGM1011 Übersetzung Der Originalbetriebsanleitung

EN
HigH VOlumE, lOw PrEssurE
(HVlP) TyPE PAinT sPrAy sysTEm
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the following text refer to the
pictures on page 2-3
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Contents

1. Technical specifications

2. Safety instructions

3. Operating instructions
4. Maintenance
1. Technical specifications
Voltage
Frequency
Power input
Maximum nozzle flow rate
Maximum viscosity
Container capacity
Nozzle diameter
Weight
Lpa (Sound pressure level)
Lwa (Sound power level)
Vibration
Check the machine, loose parts and accessories
for transport damage.
Vibration level
The vibration emission level stated in this instruc­
4
tion manual has been measured in accordance
with a standardised test given in EN 60745; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned
• using the tool for different applications, or with
different or poorly maintained accessories,
may significantly increase the exposure level
• the times when the tool is switched off or
when it is running but not actually doing the
job, may significantly reduce the exposure
level
Protect yourself against the effects of
vibration by maintaining the tool and its
accessories, keeping your hands warm, and
organizing your work patterns
Product information
Fig. A
1. Nozzle
2. Trigger
3. Output control
4. Air hose
5. Air filter
6. On/Off switch
7. Paint container
2. Safety instructions
Explanation of symbols
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
230 V~
manual.
50 Hz
350 W
280 ml/min
Denotes risk of electric shock.
40 DIN/sec
700 ml
1.8 mm
2.5 kg
Wear protective gloves.
83 + 3 dB(A)
96 + 3 dB(A)
<2.5 m/s
2
Wear a dust mask.
Wear eye protection.