Technical Specifications; Safety Instructions - Ferm SGM1012 Bersetzung Der Originalbetriebsanleitung

ELECTRICAL SPRAY GUN
SGM1012
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the following text refer to the
pictures on page 2-3
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Contents

1. Technical specifications

2. Safety instructions

3. Operating instructions
4. Maintenance
1. TECHNICAL SPECIFICATIONS
Voltage
Frequency
Power input
Maximum nozzle flow rate
Container capacity
Nozzle diameter
Weight
Lpa (Sound pressure level)
Lwa (Sound power level)
Vibration
Check the machine, loose parts and accessories
for transport damage.
4
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60745; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
Product information
Fig. A
1. Motor housing
2. Output control
3. Trigger switch
4. Handle
5. Paint container
6. Spray basket nozzle
7. Viscosity cup
2. SAFETY INSTRUCTIONS
Explanation of symbols
Denotes risk of personal injury, loss of life
220-240 V~
or damage to the tool in case of non-
50 Hz
observance of the instructions in this
110 W
manual.
300 ml/min
800 ml
Denotes risk of electric shock.
0.8 mm
1.75 kg
91 dB(A)
Wear protective gloves.
102 dB(A)
11.53 m/s
2
Wear a dust mask. Working with wood,
metals and other materials may produce
dust that is harmful to health. Do not
work with material containing asbestos!
Wear eye protection.