Functional Description; Intended Use; Product Features - Bosch GCM 10 J Professional Originalbetriebsanleitung

Symbol
30 mm

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.

Intended Use

The power tool is intended as a stationary ma-
chine for making straight lengthways and cross-
ways cuts. In this, mitre angles from –47° to
+47° as well as bevel angles from –2° to 47° are
possible.
The capacity of the power tool is designed for
sawing hardwood, softwood, particle and fibre-
board, as well as aluminium and plastic.
Bosch Power Tools
Meaning
Wear safety goggles.
Wear ear protectors. Exposure to noise can cause hearing loss.
Danger area! Keep hands, fingers or arms away from this area.
Observe the dimensions of the saw blade. The hole diameter must
match the tool spindle without play. Do not use reducers or adapters.
Danger area! Keep hands, fingers or arms away from this area.

Product Features

The numbering of the components shown refers
to the representation of the power tool on the
graphic pages.
1 Lever for releasing the tool arm
2 Handle
3 On/Off switch
4 Retracting blade guard
5 Fence
6 Saw table
7 Insert plate
8 Locking knob for various mitre angles
(horizontal)
9 Lever for mitre angle adjustment
(horizontal)
10 Angle indicator (horizontal)
11 Detents for standard mitre angles
12 Scale for mitre angle (horizontal)
English | 29
1 609 929 W04 | (11/2/10)