Connection And Operation - Migatronic Rwf 30 Betriebsanleitung
Verfügbare Sprachen
Verfügbare Sprachen
Connection and operation
Warning
Read warning notice and instruction
manual carefully prior to initial
operation and save the information
for later use.
Connection
11
7
10
9
2
1.
Compressed air connection
AIR Clean - Inlet
2.
Compressed air connection
AIR Clean - Outlet
3.
CAN-plug
4.
Gas connection
5.
Power +
6.
Connection of cooling hose (not all models)
- flow (blue)
- return (red)
7.
Status indicator
8.
Wire inlet
9.
Torch connection
10. Collision protection signal to robot controller
11. Torch collision protection and
touch sense connection
8
6
3
6
1
4
5
Important!
In order to avoid destruction of
plugs and cables, good electric
contact is required when connecting
earth cables and intermediary cables
to the machine.
Cable dimensions
Welding current
DC
200 A
35 mm²
300 A
50 mm²
400 A
95 mm² / 2x50 mm²
550 A
2x70 mm²
Welding process
Distance to
work piece
MIG - IAC and pulse 10 m
MIG - non pulse
30 m
c
WARNING
When you activate the torch trigger,
there is voltage applied to the
welding wire.
PULSE
35 mm²
70 mm²
95 mm² / 2x50 mm²
2x70 mm²
Total cable length
in welding circuit
(a+b)
(a+b+c)
20 m
60 m
a
b
7
