(like in teach mode). If the delay time is short, the flas-
hing may not even be noticeable.
11 Maintenance and cleaning
This product is maintenance-free. Repairs are only to
be done by trained professionals.
The dimmer has an internal device fuse (fuse
holder C)! This fuse protects the Triac from
greater current load. If the device becomes
overloaded and the fuse is blown, it can be
replaced!
Test the connected load for a defect before
putting back into operation!
Replace fuses with same type fuses only
(micro-fuse 5 x 20 mm, 1.25 A slow)!
37