HomeMatic HM-LC-Dim1L-Pl-3 Bedienungsanleitung Seite 32

During teach-in, please make sure you maintain
a distance of at least 50 cm between the
HomeMatic devices and the Central Control
Unit.
To teach-in your device to the Central Control Unit,
proceed as follows:
• Open the „WebUI" user interface in your browser.
• Click the „Teach-in devices" button on the right-hand
side of the screen.
• To activate teach-in mode, click „BidCoS-RF teach-in
mode" in the next window.
• Teach-in mode remains activated for 60 seconds.
An information box shows how much teach-in time
remains.
• Meanwhile, please activate the teach-in mode of the
dimming acutator to teach-in as well.
• Therefore, press and hold down the channel button
for at least 4 seconds. The device LED will flash con-
tinuously to indicate that teach-in mode is active.
• After a short time, the newly taught-in device will ap-
pear in the inbox of your software interface. The but-
32