Start Up; Simple Operating Functions On The Device; Teaching-In - HomeMatic HM-LC-Dim1L-Pl-3 Bedienungsanleitung

6

Start up

6.1 Simple operating functions on the de-
vice
You can operate the actuator immediately with the
channel button (teaching is not required) and check for
correct electrical installation. The button is used like an
ON/OFF toggle switch.
Only the brief button press is used for operation. The
longer button press (longer than 4 seconds) switches
the actuator to teach mode.

6.2 Teaching-in

Please read this entire section before starting
the teach-in procedure.
Before being able to use your device with
QIVICON, it has to be taught-in to your
QIVICON Home Base.
Therefore, please log-in to „My QIVICON" at
www.qivicon.com/login. There, please select
„Add device" and follow the instructions.
29