7 Maintaining the product
9. Connect the data logger to the PC with a USB cable.
10. Start testo Comfort Software and set up a connection to the
data logger.
11. Reconfigure the data logger or load the old, saved
configuration, see separate operating instructions testo Comfort
Software.
-
The data logger is once again ready for use.
7.2.
Cleaning the instrument
CAUTION
Damage to the sensor!
> Ensure that no liquid enters the inside of the housing.
> If the housing of the instrument is dirty, clean it with a damp
cloth.
Do not use any aggressive cleaning agents or solvents! Weak
household cleaning agents or soap suds can be used.
56
The data logger needs to be reconfigured. For this purpose
the software testo Comfort Software must be installed on
the computer and a connection to the data logger must
have been set up.