Installation; How To Install; Where To Install; Installation Choice - Megasat D Serie Bedienungsanleitung

4. Installation

4.1 How to Install?

By following the instructions step by step you can proceed easily to install Flat Antenna
by yourself or with the help of a professional antenna installer.
Before installing your antenna, you check that contains all the items listed above in the
'Box Content' . In the event of any missing parts, please contact your distributor.

4.2 Where to Install?

In order to receive a signal from the Satellite, Flat Antenna is to be installed in an open
loop space (outside the house or the apartment), in the direction of the satellite towards
the equator, for which, you will need a compass to exactly orient Flat Antenna toward
the satellite.
Note:
To ensure an accurate compass reading, stay away from
N S
large metal objects, specifically electrical cables and
then make multiple readings.
Make sure that there are no obstacles in front of Flat Antenna which can decrease the
signal reception quality, such as buildings, or trees (you may keep in mind that trees
will grow and may block the signal). In order to be able to fix and install your antenna
easily you might choose an easily accessible place without any potential danger for in-
stallation. Think about the way you might pass your cable in a discreet way from the
SELFSAT-H21D+ / H30D+ to your Set top Box. The antenna should not be too distant
from your satellite receiver; a cable longer than 30 meters can decrease the quality of
the signal.
06
ENGLISH
4. Installation
Bad Quality Singnal Reception

4.3 Installation Choice

Depending on the choice of installation position for the Flat Antenna, you can then de-
cide on the mounting type, all parts are included.

a) Table Stand Type (on a Horizontal Plain)

1
A1
S2
S5
N1
B1
S2
3
Good Quality Singnal Reception
2
S1
B1
S4
B5 S2
ENGLISH
N1
07