Removal Of The K-Fix + After Semi-Universal Use; Removing And Applying The Cover; Removing The Back Rest Cover - KIDDY Guardianfix 3 Bedienungsanleitung

9 Removal of the k-fix + after semi-universal use

Actuate the unlocking handle (R) (Fig. 30, No. 1) while simultaneously pulling the
seat (I) away from the vehicle back rest (Fig. 30, No. 2).
Open the left and right k-fix
(S) forward (over the 'green' locking display (T)) (Fig. 31).
The Guardianfix 3 is uncoupled from the vehicle structure when both connectors
(E) are open.
+
Finally, the k-fix connectors (E) must be retracted into the seat.
To do so, rotate the connectors (E) towards the seat (Fig. 32). For this purpose,
actuate the unlocking handle (R) (Fig. 33, No. 1) and push the connectors (E)
completely into the seat (I) (Fig. 33, No. 2). The connectors must be correctly
retracted into their respective recesses in the seat.
Now release the unlocking handle (R).

10 Removing and applying the cover

Never use your KIDDY child restraint system without the original
!
cover. The cover is part of the safety concept.

10.1 Removing the back rest cover

The back rest cover consists of two pieces. One part covers the headrest (G) and
back rest, the other covers the shoulder supports (H).
First, separate the headrest cover from the shoulder support cover. Now open
the hook and loop fasteners on the back of the headrest (G), remove the cover
from the height adjustment handle (P) and take the cover off.
+
connectors (E) by sliding the unlocking mechanisms
31
EN