Securing The Child - KIDDY Guardianfix 3 Bedienungsanleitung

Now slide both k-fix
points) and push firmly against them such that the connectors (E) lock in place
(Fig. 15).
The correct engagement is confirmed with the 'green' k-fix
(T) (Fig. 16).
Check whether the k-fix + connectors (E) are closed by shaking
!
the seat (I) and check whether the lock indicators (T) on the left
and right k-fix + connectors both show 'green'!
Now you have fastened the Guardianfix 3 in the (maximum)
!
lie-flat position in the vehicle. The lie-flat position may only
be used for Group I (9–18 kg) in combination with the impact
shield.
After installing the child restraint system (A) with k-fix
seat is positioned on the vehicle seat and the belt is not covered. For this purpose,
you can slide the seat slightly to the left or right as necessary.
If you would like to use the child restraint system for a Group I child in the seated
position or for Group II and III (15-36 kg; without impact shield), you must push
the seat (I) against the vehicle back rest).
for this purpose, actuate the unlocking handle (R) (Fig. 17, No. 1) while simulta-
neously pushing the seat (I) towards the vehicle back rest (Fig. 17, No. 2).
In order to secure you child in the seat fastened with k-fix
described under point 7.

7 Securing the child

semi-universal: If you would like to use the child seat with k-fix
!
fastening, ensure that it is fastened to the vehicle as described in point 6!
+
connectors (E) onto the metal mounts (ISOFIX anchorage
+
27
EN
+
locking indicator
, ensure that the child
+
, proceed as
+