Safety Instructions - RUSTA 90751061 Gebrauchsanweisung

ENG
Thank you for choosing to
purchase a product from Rusta!
Heater Fan
Read the user manual carefully to make sure that the product is assembled, used and
maintained correctly, as described in the instructions in this user manual. Keep the user
manual for future reference.

SAFETY INSTRUCTIONS

• Position the heater fan on a level surface. The heater fan may not
overturn and may not be used when it is upside down.
• Do not use the fan heater in areas filled with explosive or easily
flammable substances.
• Do not connect the heater fan to an electrical outlet where other
electrical devices are connected.
• The voltage of the electrical outlet must be the same as that which is
specified on the heater fan's rating plate.
• The electric cord is designed for 10 amperes or higher.
• Make sure that the plug is properly connected to the electrical outlet.
If it is not connected properly the plug can overheat and the heater fan
will not operate correctly.
• When pulling out the plug, hold the plug – do not pull on the electric cord.
• Do not place the heater fan near radios or televisions. The electro-
magnetic waves can cause disturbances.
• Always keep the heater fan under supervision when it is switched on.
• Never leave the plug in the electrical outlet when the heater fan is not
in use.
• Position the heater fan at least 1 metre away from easily flammable
objects (e.g. furniture, curtains, paper or clothing).
• The openings for the air inlet and air outlet may not be blocked. Leave
a clearance of at least 1 metre in front of the heater fan and at least
50 cm behind the heater fan.
• Due to the risk of electric shock, fire and damage to the heater fan,
do not insert any objects in the openings of the heater fan.
2
Read through the entire manual
before installation and use!