Dmx Connection - Lightmaxx VECTOR BSW 10R Bedienungsanleitung

Congratulations on owning your new LightmaXX product!
Thank you for choosing this LightmaXX product. Before using this product, please read
this manual carefully in order to understand and be informed about all of its various
features and functions, for your own safety and that of others.
Please keep this manual in a safe place.
Enjoy your new product!
Your LightmaXX Team
Guaranty
The current terms and conditions as well as the warranty terms
of the MUSIC STORE professional GmbH apply.
Can be viewed at: www.musicstore.de
For more information or any questions please contact us at:
MUSIC STORE professional GmbH
Istanbulstr. 22-26
51103 Köln
Director: Michael Sauer
WEEE-Reg.-Nr. DE 41617453
Tel: +49 221 8884-0
Fax: +49 221 8884-2500
info@musicstore.de
To ensure a perfect DMX connection, use only 3 or 5 pin DMX cables with a characteristic impedance
of 120 Ohm.
This spotlight can be installed in any position on the stage using the enclosed Omega brackets and
optional brackets (Half Coupler, Selflock Hook).
Each of the two Omega Brackets is equipped with 2 Quicklocks.
Rotate these clockwise to attach the brackets.
To reopen the clasp, turn it counter clockwise.
Note:
Two Omega brackets are needed to install the headlight. These are included,
Warning:
Secure the spotlight with a steel safety cable.
Install the safety at the safety eyelet provided for this purpose.
Anzahl

DMX Connection

Installation
Included
Bezeichnung
1x LightmaXX VECTOR 10R
1x Powercon Cable
1x 10R Bulb (installed)
2x Omega Bracket
7