Function Modes; Display Settings - Lightmaxx VECTOR BSW 10R Bedienungsanleitung

1. Set the DMX address
By selecting „ADDR" in the main menu, you can set the desired DMX address between 1 and 512.
Confirm your selection by clicking on the encoder wheel or confirm via the touch screen.
2. Set the operating mode
By selecting „WORK MOD" in the menu, you can set the operating mode.
The spotlight contains 3 operating modes: DMX MODE, AUTO RUN and SOUND MODE.
The parameters can be set as follows:
3. M/S Choose
In this mode, the master / slave option of the device can be activated or deactivated.
4. Lamp Control
In this mode, the lamp of the spotlight can be manually turned on or off.
Once the light is switched off, the power-on function is disabled for 30 seconds to protect the light
source.
5. Channel Mode
In this mode you can choose between 2 different channel modes:
Sample (Simple Mode) or Extend (Advanced Mode)
1. Language:
2. Screen Saver:
3. Screen Rotation:
4. Touch enable:
5. Touch Adjust:
8

Function Modes

DMX Mode: In this mode the spotlight can be controlled via DMX.
AUTO RUN: In this mode, the spotlight activates the automatic programs
stored on the unit. The DMX mode is deactivated in AUTO RUN.
SOUND Ctrl: In this mode, the spotlight reacts to loud noises, e.g. The beat
of the music. If no music is running, the unit remains in the
last scene used. The DMX mode is deactivated in the
SOUND Ctrl mode.

Display Settings

This menu subsection allows you to select the language between Chinese
and English.
If the display is not used for more than 10 seconds, it switches to Saver mode.
Modus 1: Display turns off when it is not needed
Modus 2: Display shows the DMX address (in DMX mode) or the selected mode
(Auto Run or Sound Ctrl).
Off:
Display light remains on, display shows the main menu.
Under this menu subsection the display can be rotated (overhead mounting,
standing installation)
Under this menu subsection, the touch function of the display can be
activated and deactivated.
The touch screen can be adjusted under this menu sebsection.