SUNDAY EASY Installations- Und Bedienungsanleitung Seite 84

4-TRANSPORT AND INSTALLATION
EN
Fit the top part in the housing on top of the oven by inserting the front and rear panels and fastening them with the 4 screws supplied.
Place the 2 sheets of the top part on top by overlapping them slightly and fasten them with 6 screws, as shown in the figure. Insert the
chimney and fasten the side flaps to the top part with 2 screws, for enhanced tightness.
Move the oven a short distance by pulling the handles - d not push the oven (this must only be done when the oven is off and cold).
ATTENTION RISK OF OVERTURNING!
Lift the oven a maximum of 6 cm off the ground, making sure there are no obstacles that could cause it to overturn.
84