Maintenance - Makita EA3600F Originalbetriebsanleitung

MAINTENANCE

Always wear protective gloves.
Start the chain saw only after having assembled and inspected it completely.
The chain penetrates the wood only under great pressure.
The cutting edge is visibly damaged.
The saw is pulled to the left or right when sawing. This is caused by uneven
sharpening of the chain.
Have the chain resharpened at a service centre when you have already
sharpened it yourself several times.
- Maintain all cutter parts (1) on the saw chain the same length. Cutter parts with
chain.
-
- The depth of the cut (3) is determined by the difference in height between the
depth gauge (round nose) and the cutting edge.
- The best results are obtained with 0.64 mm (.025") of the depth.
-
-
teeth.
-
1
21
3
1
1
2
55
55
3