The saw chain may become loose after many hours of use. When you change the
The tension of the chain is correct if the chain rests against the bottom side of the
guide bar and can still be easily turned by hand.
(For model EA3601F) Press and fully open the lever until it stops. Turn the lever
3. Slightly lift and hold the tip of the guide bar.
tension.
tension.
chain tension.
(For model EA3600F) Tighten the retaining nuts to secure the chain cover.
Then press and close the lever.
against the lower side of the bar.
16
EA3600F
EA3601F
EA3600F
EA3601F