SCHUBERTH F120 pro Bedienungsanleitung Seite 12

F120
P R O
Characteristics and markings
Please refer to the table for details on the helmet's characteristics and their
meanings. You will find the markings on the inner surface of the helmet
shell's rear section.
SCHUBERTH F 120 Pro firefighter helmet
Marking Meaning
EN 443:2008 European standard under which the helmet was tested
and approved
07/13 Sample details of month and year of manufacture
(July 2013)
Typ A Type: half-shell helmet
F 120 Pro Helmet designation
50-57/53-61/59-64 Head size of the SCHUBERTH F 120 Pro in cm
UP-GF Helmet material code
(glass-fibre reinforced duroplastic material)
ID number of the supervisory inspection agency
0299
Optional characteristics and markings
Marking Meaning
**** The SCHUBERTH F 120 Pro firefighter helmet is suitable
for use at low temperatures down to –40 °C
Approval for firefighting on ships
E2 E3 Electrical insulation capability of the SCHUBERTH F 120
Pro firefighter helmet and helmet shell when wet
C Resistance in contact with liquid chemicals
22
Summary of chemicals
for which the helmet has been tested
Chemical
Sulphuric acid
Sodium hydroxide
p-xylene
1-butanol
n-heptane
Controlled by the notified body 0299
Technical Committee for Personal Protective Equipment (PSA)
Testing and certification authority in BG-PRÜFZERT
Zwengenberger Straße 68
42781 Haan
Germany
Tel. +49 (0)2129 576-431
Fax +49 (0)2129 576-400
Manufacturer
SCHUBERTH GmbH
Stegelitzer Str. 12
39126 Magdeburg
Germany
Tel. +49 (0)391 8106-0
Fax +49 (0)391 8106-444
E-mail: feuerwehr@schuberth.de
www.schuberth.com
We reserve the right to make technical alterations without prior
notice. No liability is accepted for errors and omissions.
Concentration (mass %)
30 (aqueous solution)
10 (aqueous solution)
undiluted
undiluted
undiluted
23