Status Displays - G&D MultiPower-12-NT Installationsanleitung

Status displays

Status displays
The LEDs on the front and the back panel of the
central power supply show the device status and
the load of active devices.
Section LED
Ident.
Network yellow
green
Load
Status Ready
System
Power Red.
Main
5 · G&D MultiPower-12-NT
Status Meaning
on On as soon as the LED has been activated via
web application.
on The connection to the network has been suc-
cessfully established.
off A connection could not be established.
flickering Network activity.
off No network activity
The load of the active devices is displayed in an LED
scale.
Four green and two yellow LEDs highlight the reach-
ing of the maximum load.
If the maximum load is exceeded, one or two red
LEDs light up.
Note: If one or two red LEDs indicate that the temper-
ature within the device is too high, make sure to cool
the device.
on Device is ready for operation.
off Device is not ready for operation.
green Device is ready for operation.
blinking, Executing update.
green
fast blinking, Device is reset to default settings after pushing the
green Reset button for a long time.
red Internal error
on The power pack is turned on and supplies the
required voltage.
off The power pack is turned off, or there is no connec-
tion to the mains.
on The power pack is turned on and supplies the
required voltage.
off The power pack is turned off, or there is no connec-
tion to the mains.
Ident. Network
Load Status Power
Ready
System
Red.
Main