Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Safety Precautions
This product complies with the requirements of the following European Community Directives:
2004/108/EC (Electromagnetic Compatibility) and 2006/95/EC (Low Voltage) as amended by
2004/22/EC (CE-Marking).
To ensure safe operation of the equipment and eliminate the danger of serious injury due to short-
circuits (arcing), the following safety precautions must be observed.
Damages resulting from failure to observe these safety precautions are exempt from any legal claims
whatever.
*
Do not use this instrument for high-energy industrial installation measurement.
*
Prior to connection of the equipment to the mains outlet, check that the available mains
voltage correspond to the voltage setting of the equipment.
*
Connect the mains plug of the equipment only to a mains outlet with earth connection.
*
Do not place the equipment on damp or wet surfaces.
*
Do not cover the ventilations slots of the cabinet to ensure that air is able to ciculate freely
inside.
*
Do not insert metal objects into the equipment by the way of ventilation slots
*
Do not place water-filled containers on the equipment (danger of short-circuit in case of
knockover of the container)
*
Do not operate the equipment near strong magnetic fields (motors, transformers etc.).
*
Do not operate the meter before the cabinet has been closed and screwed safely as terminal
can carry voltage.
*
Replace a defective fuse only with a fuse of the original rating. Never short-circuit fuse or fuse
holding.
*
Check test leads and probes for faulty insulation or bare wires before connection to the
equipment.
*
Please use only 4mm-safety test leads to ensure immaculate function.
*
To avoid electric shock, do not operate this product in wet or damp conditions. Conduct
measuring works only in dry clothing and rubber shoes, i. e. on isolating mats.
*
Never touch the tips of the test leads or probe.
*
Comply with the warning labels and other info on the equipment.
*
The measurement instrument is not to be to operated unattended.
*
Do not subject the equipment to direct sunlight or extreme temperatures, humidity or
dampness.
*
Do not subject the equipment to shocks or strong vibrations.
*
Keep hot soldering irons or guns away from the equipment.
*
Allow the equipment to stabilize at room temperature before taking up measurement
(important for exact measurements).
*
Use caution when working with voltages above 35V DC or 25V AC. These Voltages pose
shock hazard.
*
Periodically wipe the cabinet with a damp cloth and mid detergent. Do not use abrasives or
solvents.
*
The meter is suitable for indoor use only
*
Do not store the meter in a place of explosive, inflammable substances.
*
Opening the equipment and service – and repair work must only be performed by qualified
service personnel
*
Do not place the equipment face-down on any table or work bench to prevent damaging the
controls at the front.
*
Do not modify the equipment in any way
Measuring instruments don't belong to children hands.
*
Cleaning the cabinet:
Prior to cleaning the cabinet, withdraw the mains plug from the power outlet.
Clean only with a damp, soft cloth and a commercially available mild household cleanser. Ensure that
no water gets inside the equipment to prevent possible shorts and damage to the equipment.
-30-
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
