Quick Reference Of The Timed And Preset Program; Operating Instructions; Setting Of Operating Mode; Enable/Disable Output - PeakTech 1890 Bedienungsanleitung

5.2. Quick Reference of the timed and preset program

The unit can store 10 programs (program number 0-9).
Program 0 is reserved for storing 20 steps (timed subprograms).
Program 1 to 9 is for 9 sets of preset voltage and current.
Please refer to Figure 5.2. for structure.
Program 0
Timed Program
The timed program
can store 20 steps
(timed subprograms)
Timed Subprogram
Each subprogram is
capable of storing 1 second
to 99 minutes operation
period.
The timed program can run
repeatedly 1 to 256 cycles
or infinite cycles ("0").
Figure 5.2. Block Diagram of Timed and Preset Program

6. Operating Instructions

NOTE: This section shows how to perform power supply functions using the front panel.
Operations that you can perform are:

6.1. Setting of Operating Mode

6.1.1.

Enable/Disable Output

6.1.2.

Lock/ Unlock the Keypad and Jog Dial

6.1.3. PC Interface RS-232/RS-485 Selection
6.1.4.

Upper Voltage Limit Setting

6.1.5.

Output Enable/Disable at Power Up

6.2. Basic Operation

6.2.1. Setting of Voltage and Current by Jog Wheel and UP & DOWN Key
6.2.2. Setting of Voltage and Current by Key Pad
6.3. Using programming features
6.3.1.

Timed Programming

6.3.2.

Running the Timed Program

6.3.3.

Preset Programming

6.3.4. Selecting the Preset
Programming Features
-34-
Program 1-9
Preset Program
9 sets of preset
voltage and current
Page 5
Page 5
Page 5
Page 5
Page 5
Page 5
Page 5
Page 5
Page 5
Page 5
Page 5