General Operation Principle; Quick Reference Of Keypad Functions - PeakTech 1890 Bedienungsanleitung

5. General Operation Principle

Note: This section contains a condensed overview of the unit. Read this section to quickly get started.

5.1. Quick reference of Keypad Functions

The front Keypad is organised as follows:
(1) Number Keys, UP/DOWN Keys and Jog Wheel
(2) 4 Dual Function Control Keys
The front panel functions are summarized as follows:
Keypad
0 9
thru
UP
DN
Jog Wheel
SHIFT
CLEAR
thru
0
PROG. 9
SHIFT RS-232/485
9
0
thru
RECALL
SHIFT
LOCK/UNLOCK
ENTER
SHIFT O/P on/off
SHIFT
SHIFT
0
SHIFT
Function
Number Keys, UP/DOWN Keys and Jog Wheel
Press to select numerical values
Press to ascend the numerical values
Press to descend the numerical values
Rotate to adjust the voltage and current settings
Dual Function Control Keys
Press to access alternate function of the control keys
Press to terminate any input process and the unit will exit to
normal operation
Press to use programming features.
0
Use to recall the timed program.
1 9
Use thru to specify the location of preset program
to be 6.3.3.stored.
Use to confirm
ENTER
Press to enter the PC interface selection menu.
You can choose either RS-232 or RS-485
RS-232/485
Use to select RS-232 or RS-485
Use to confirm the settings
ENTER
Press to recall your stored preset or timed program
0
Use to recall the timed program
1 9
Use thru to specify the location of preset program
to recall.
ENTER
Use to confirm
Press to Lock/Unlock the Keypad and Jog Wheel
Press to confirm the new settings
Press to Enable/Disable the output
Press to Enable the output at power up
Press to Disable the output at power up
SPECIAL FUNCTION
Press to get to the upper voltage limit setting
0
9
Use thru to input the numerical values
Use to confirm
ENTER
-33-
Section
6.2.2.
6.2.1.
6.2.1.
6.2.1.
5.2.
6.3.1.
6.1.3.
6.3.2.
6.3.4.
6.1.2.
6.1.1.
6.1.5.
6.1.5.
6.1.4.