Data Logging And Setting Windows In Application Software - PeakTech 1890 Bedienungsanleitung

5. and 6. Voltage and Current display on LCD
Alternative way to adjust the Output Voltage and Current,
Left click to increase by 0.1 unit;
Right click to decrease by 0.1 unit.
7. Output
Left click on icon will switch ON or OFF the ouput.
8.4.3. Data Logging and Setting Window in Application Software
Figure 8.4.3a Data Logging Function for a Single Power Supply
1. Setting Window
In "Setting" Window, the Data Log Sampling Time and Voltage Upper Limit Setting can be set
by User.
You can input your desired sample time from 1 second up or select from the drop menu.
You can set your output voltage upper limit value to further safeguard your low voltage applications.
2. Data Log Window
A. You can use the "Data Log" window to view present output data or stored data.
B. All the parameters at the bottom of the window display can be changed by direct entry from
the PC (with decimal point) and then confirm by the Enter key of the PC, or select the values
from respective drop menu.
Parameters at the bottom of the Data Log window:
V Min -------- Minimum Voltage Level.
V Max -------- Maximum Voltage Level.
C Min -------- Minimum Current Level.
C Max -------- Maximum Current Level.
W Min -------- Minimum Power Level in Watt.
W Max ------- Maximum Power Level in Watt.
Data log Sampling Time
Voltage Upper Limit Setting
-44-