Using The Programming Feature; Timed Programming - PeakTech 1890 Bedienungsanleitung

6.6. Using the Programming Features

6.6.1. Timed Programming

Action
1. Press
PROG.
2. Press
0
3.
Press ENTER
4. to
9
0
5. Press
ENTER
6. to
0
9
7. Press
ENTER
9
0
8. to
9 Press
ENTER
10 to
0 9
11 Press
ENTER
12 Repeat
Procedures 4 to 11
13 Press
ENTER
Note: Whenever to terminate the Timed Program, press "CLEAR" to return to the normal
operation.
LCD Display
Program _
StEP
-.-00
Program 0
V-set
I-set
m
Timer 00:00
s
Timer 00:00
StEP
-.-01
-37-
Description
This will use the Programming Feature
This will enter into Timed
Programming Mode.
There are 0-19 steps(timed subprograms) and
the first step is 0.
Press this key to confirm
Use the number key to input your
desired voltage
Press this key to confirm the voltage
setting.
Use the number key to input your
desired current.
Press this key to confirm the current setting.
Use the number key to input your desired
minutes in the timer.
Press this key to confirm the minutes setting.
Use the number key to input your
desired seconds in the timer.
Press this key to confirm the seconds
setting.
The program will then advance to the next
step. i.e. Step 1
You can repeat procedure 4 to 11 for
setting the next step.
Input zero timer period to terminate
the step.
For example, if you want the timed program to
terminate at step 4, just input zero timer period
of step 4.
Press this key until StEP icon
disappears.