Running The Timed Program; Preset Programming - PeakTech 1890 Bedienungsanleitung

6.6.2. Running the Timed Program

Action
1. Press
RECALL
2. Press
0
3.
Press
UP or DN
4.
ENTER
Press
5. to
1
9
ENTER
6. Press
Note: whenever to terminate the Timed Program, press "CLEAR" to return to the normal
operation.

6.6.3. Preset Programming

Action
1. Press
PROG.
2. to
1 9
3. to
0
9
4. Press
ENTER
5. to
0 9
6. Press
ENTER
7. Repeat Procedures
3 to 6
LCD Display
Recall _
StEP
-.-00
Recall 0
CyC –
000
Recall o
LCD-Display
Program _
Program 4
V-Set
I-Set
-38-
Description
This will use the Recall Program
Feature.
This will enter into Recall Timed
Program Mode.
Press to check the settings of the
steps(timed subprograms)
Press Enter to confirm
Use the number key (1-9) to input the
number of running cycles
You can key in 1-256 cycles.
0000 means the timed program will run
infinite cycles.
Press this key to activate the timed
program.
Description
This will use the Programming Feature.
Use the number key (1-9) to select the
program number and it will enter into the
Preset Programming Mode.
In this example, Preset Program
Number 4 is selected.
Use the number key to input your
desired voltage.
Press Enter to confirm the voltage
setting.
Use the number key to input your
desired current.
Press this key to confirm the current
setting.
The program will then advance to the
next Preset. In this example, it will
advance Program 5
You can repeat procedure 3 to 6 to
change the setting of next preset,
otherwise just press enter until
Program_ icon disappears.