Back Panel Connections; Ground Terminal - T+A PA 3000 HV Betriebsanleitung

The PA 3000 HV features complete and consistent channel separation in the signal processing stages (double-mono
construction), and for this reason the input and output sockets are also arranged in strict symmetry relative to the centre
of the machine.
IN 1 ... IN 4
IN 5
GND

Ground terminal

IN 6
RECORDER
42

Back panel connections

Universal pre-amplifier line inputs for connecting any stereo audio or TV equip-
ment fitted with symmetrical XLR or asymmetrical Cinch outputs.
Caution
   
The PA 3000 HV is equipped with symmetrical (XLR) and asymmetrical (Cinch)
sockets for inputs
must be used at any one time, i.e. the socket not in use must not be connected
to anything. Your preferred method of connection must be set in the System
Configuration menu; see chapter entitled 'Basic settings of the PA 3000 HV'.
In the System Configuration menu it is possible to set input IN 4 (SRND) to
   
separate volume control for use with surround decoders. For more information
please see the chapter entitled 'Surround operation with the PA 3000 HV'.
General-purpose pre-amplifier input sockets for connecting high-level signal
sources.
The ground lead from an analogue disc player is connected here in order to
avoid hum.
General-purpose pre-amplifier input sockets for connecting high-level signal
sources.
Input and output sockets for connecting a second device with recording and
playback facilities (recorder).
IN 1 ... IN 4
. For each input only one type of connection