Herunterladen Inhalt Inhalt Diese Seite drucken

Initial Operation - Bosch Drive Unit Benutzerhandbuch

Performance line
Vorschau ausblenden Andere Handbücher für Drive Unit:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

English–3
Note: If the distance between speed sensor 19 and spoke
magnet 20 is too small or too large, or if the speed sensor 19
is not properly connected, the speed indication r3 will fail,
and the eBike drive unit will operate in emergency mode.
In this case, loosen the screw of the spoke magnet 20 and fas-
ten the spoke magnet to the spoke in such a manner that it
runs past the mark of the speed sensor at the correct clear-
ance. If the speed is still not being indicated in the speed indi-
cation r3 after this, please contact an authorised bicycle
dealer.
Operation

Initial Operation

Requirements
The eBike system can only be activated when the following
requirements are met:
– A sufficiently charged eBike battery pack is inserted (see
operating instructions of the battery pack).
– The on-board computer is properly inserted in the holder
(see "Inserting and removing the on-board computer",
page English–2).
Switching the eBike System On/Off
Options for switching on the eBike system:
– Place the on-board computer into the holder 4.
– When the on-board computer and the eBike battery pack
are inserted, briefly press the On/Off button 5 of the on-
board computer.
– When the on-board computer is inserted, press the On/Off
button of the eBike battery pack (see battery pack operat-
ing instructions).
The drive is activated as soon as you step on the pedals
(except when in the push aid feature, see "Switching the
Push/Start Aid On/Off", page English–8). The motor output
depends on the settings of the assistance level on the on-
board computer.
Version Cruise: As soon as you stop pedalling when in normal
operation, or as soon as you have reached a speed of
25 km/h, the assistance from the eBike drive unit is switched
off. The drive is automatically re-activated as soon you start
pedalling again and the speed is below 25 km/h.
Version Speed: As soon as you stop pedalling when in normal
operation, or as soon as you have reached a speed of 45 km/h
the assistance from the eBike drive is switched off. The drive
is automatically re-activated as soon as you start pedalling
and the speed is below 45 km/h.
Options for switching off the eBike system:
– Press the On/Off button 5 of the on-board computer for at
least 1 second.
– Switch the eBike battery pack off by its On/Off button (see
battery pack operating instructions).
– Remove the on-board computer out of its holder.
0 276 001 SPN | (17.7.14)
If no power is drawn from the drive for about 10 minutes (e.g.
because the eBike is not moving) or no button is pressed on
the Nyon, the eBike system will shut down automatically to
save energy.
The "Nyon" operating system
The Nyon operating system consists of three components:
– the Nyon on-board computer with operating unit
– the smartphone application "Bosch eBike Connect"
– the online portal "www.eBike-Connect.com"
Many configurations and features can be managed and used on
all components. Some configurations and features can be ac-
cessed or operated only via certain components. The synchro-
nization of data occurs automatically during Bluetooth®-/inter-
net connection. The following table provides an overview of the
available features.
GSM,
3/4G
Log in/registration
Change of configurations
Recording of journey data
Real-time display of journey data
Processing/analysis of journey data
Creating user-defined displays
Display of the current location
Navigation
Route planning
Display of remaining distance (circle around
the current location)
Training effect in real-time
Display of training progress
Overview of journeys
Statistics "Dashboard"
Purchase of "premium features"
Premium features
The standard features of the "Nyon" operating system can be
expanded via the AppStore for Apple iPhones and Google
Play Store for Android devices through the purchase of "pre-
mium features".
In addition to the free application "Bosch eBike Connect"
there are several fee-based premium features. A detailed list
of available additional applications can be found in the online
manual under "www.Bosch-eBike.com/nyon-manual".
www
  
  
 
 
  
  
 
 
 
Bosch eBike Systems

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis