Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting In Brief - Bellman & Symfon Audio Domino BE2210 Bedienungsanleitung

Drahtloses digitales kommunikationssystem
Vorschau ausblenden Andere Handbücher für Audio Domino BE2210:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

Troubleshooting in brief

Problem
Solution
Nothing happens when
Connect the charger and check that charging starts within
you try to start the units.
10 seconds.
Please note! If charging does not start within 10 seconds,
disconnect the charger immediately and contact the nearest
dealer!
No sound can be heard in
Turn up the volume using the volume control (9).
the headphones when the
Check that the internal microphone has been selected as
Receiver Unit is switched
the signal source and that it works by gently scraping on
on.
the microphones (1).
Check that the headphone plug is securely inserted in the
headphone output.
Connect the headphones to another sound source (with
a 3.5 mm head-phone output) to test whether the head-
phones are working.
No sound can be heard
Check that the Transmitter Unit is switched on.
in the headphones when
Check that the external microphone has been selected as
the Receiver Unit is
the signal source and that it works by gently scraping on
switched on and External
the microphones (16).
Sound is selected.
Check that the Transmitter is within range.
72
Problem
Solution
Connect the radio link and check that the connection is
made without problems.
Check that the Transmitter Unit can
switch between the omnidirectional and directional
microphone position.
Check that the sound source is correctly connected to the
Transmitter if the stereo cable is connected to the External
Sound Source Input (20).
A high-pitched noise is
Turn down the volume or increase the distance between
heard in the headphones.
the micro-phone and headphones.
Direct the microphone away from you.
The sound breaks up or
The Receiver Unit is too far away from the Transmitter Unit.
comes and goes.
Move the units closer together.
More than one Receiver is connec-ted to the Transmit-
ter and at least one Receiver is too far away from the
Transmitter.
Too many Receivers are connected to the same Transmit-
ter.
There are too many transmitters on 2.4 GHz or too many
Domino systems nearby which affect one another.
Please note that walls, concrete panels and metal reduce the
range.
DE
DK
EN
ES
FI
FR
IT
JP
NL
PL
SE
SI-CN
TR-CN
APP
73

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Audio domino be2230

Inhaltsverzeichnis