Balance Control - Bellman & Symfon Audio Domino BE2210 Bedienungsanleitung

Balance control

The balance between the right and left-hand channels can be set to compen-
sate, for example, for a hearing loss in one ear.
Press the < button (11) to adjust the balance on the
left and the > button (12) to adjust the balance on
the right.
The standard setting is centred balance.
Basic attenuation
Different headphones have different sensitivity levels and you can compen-
sate for this with basic attenuation. What you actually set is the attenuation
you require at the maximum power output you want to have (which is there-
fore 0 dB attenuation). This settings is useful when you want to adjust the
maximum volume in user mode for a pair of headphones or in-ear phones
with a higher sensitivity than the BE9122 Bellman Stereo Headphones or, for
example, if you want to limit the volume for a child.
316
Use the > button (12) to reduce the basic attenuation
MAX
(increase the volume) and the < button (11) to increase
the basic attenuation (reduce the volume). The basic at-
tenuation is adjusted in increments of 3 dB.
The standard setting is 0 dB attenuation, which corre-
sponds to the maximum output signal.
Stereo/Mono
STEREO
The line-in signal can be rendered in either Stereo or
in Mono. The speech intelligibility can be increased in
certain listening situations such as when watching TV if
the signal is in Mono.
Press the + button to select Stereo.
MONO
Press the - button to select Mono.
The standard setting is Stereo.
APP
317