Adjusting The Tone Control; Activating And Deactivating Tone Control In User Mode - Bellman & Symfon Audio Domino BE2210 Bedienungsanleitung

Bass reduction
Low-frequency interference such as fans and road noise can be tiring if you are
exposed to it for a long period. By activating bass reduction, low-frequency in-
terference and sounds are reduced.
BASS
Press the + button (9) to activate Bass Reduction.
BASS
Press the - button (10) to deactivate Bass Reduction
and get level frequency response.
The standard setting is deactivated Bass Reduction.
318

Adjusting the Tone Control

The Tone Control Blocking function has been developed in case you want to
make it easier for the user to use Bellman Audio Domino. This setting can be
used to choose whether the user should be able to adjust the tone control or
not. If you choose to switch off the tone control buttons, you can preset the tone
control that will be used in user mode.
The standard setting is tone control activated.
Presetting the Tone Control
Press the < button (11) and the > button (12) to preset
the tone control to the level that will be used in user
mode.
The standard setting is Tone Control centred (level fre-
quency response).
Activating and deactivat-
ing Tone Control in User
Mode
Press the + button (9) to
activate the tone control but-
tons and the - button
(10) to deactivate them.
APP
319