Adjusting The Tone Control; Activating And Deactivating Tone Control In User Mode - Bellman & Symfon Audio Domino BE2230 Bedienungsanleitung

Adjusting the Tone Control

The Tone Control Blocking function has been developed in case you want to
make it easier for the user to use Bellman Audio Domino. This setting can be
used to choose whether the user should be able to adjust the tone control or
not. If you choose to switch off the tone control buttons, you can preset the
tone control that will be used in user mode.
The standard setting is tone control activated.
Presetting the Tone Control
Press the < button (11) and the > button (12) to preset
the tone control to the level that will be used in user
mode.
The standard setting is Tone Control centred (level
frequency response)
Activating and deactivat-
ing Tone Control in User
Mode
Press the + button (9) to
activate the tone control but-
tons and the - button
(10) to deactivate them.
APP
295