Choice Of Microphone On The Receiver Unit; Choice Of Microphone On The Transmitter Unit; External Sound Source; External Microphone - Bellman & Symfon Audio Domino BE2210 Bedienungsanleitung

Choice of microphone on the Receiver Unit

You can switch between omnidirectional and di-rec-
tional microphone reception by pressing the M but-
ton (5). The omnidirectional microphone is indicated
by the Microphone LED (2) lighting up green and the
directional microphone by it lighting up orange.
External Sound LED (4) lighting up green and the directional microphone by it
lighting up orange.
66
Choice of microphone on
the Transmitter Unit
When you have chosen to
listen via the Transmitter
Unit by pressing the R
button (7), you can switch
between omnidirectional
and directional microphone
reception by pressing the
R button (7).
The omnidirectional micro-
phone is indicated by the

External sound source

If the audio cable supplied, (which has a small 2.5 mm jack plug on one end), or
if the External Microphone is connected to the Transmitter Unit's
external sound source input (20), the Transmitter Unit's internal microphone
will be disconnected and the external sound source will be automatically
selected. The Battery Status LED blinks orange several times to confirm that
an external sound source has been connected. The External Sound LED (4) will
light up green and orange at the same time to indicate that the sound is com-
ing from an external sound source.
If the audio cable is disconnected, the sound will be reconnected to the Trans-
mitter Unit's microphone again.
With the audio cable connected between a Transmitter Unit and a TV, hi-fi
equipment, MP3 player or similar sound source you can listen to absolutely first
class stereo sound without being limited by cables.
The input sensitivity is automatically adjusted to suit different sound sources.

External microphone

You can connect an external microphone to the Transmitter's 2.5 mm socket
(20). The Battery Status LED blinks orange several times to confirm that an ex-
ternal sound source has been connected. The External Sound LED (4) will light
up green and orange at the same time to indicate that the sound is coming
from an external sound source.
DE
DK
EN
ES
FI
FR
IT
JP
NL
PL
SE
SI-CN
TR-CN
APP
67